VV-11 FAMILY VERSATILE VME SYSTEM CHASSIS

FOUR CONFIGURATIONS

For more details and options on the Model 11's, see the VX-11 Family Brochure.	MODEL 11 Basic Bare Sheet Metal Chassis The Model 11 configuration is the minimum basic chassis. The only electrical components are the AC line filter and fuse holder. Users of this configuration would install ALL of their own internal components. All of the chassis sizes are available in the Model 11 configuration.
For additional details and options on Mass Storage Subsystem chassis, see the MASS STORAGE SUBSYSTEMS data sheet.	MODEL 16 Mass Storage Subsystem Chassis The Model 16 configuration is designed for Mass Storage Subsystem applications. The chassis include all the required components and wiring. You just add drives and data/control cables. The VCV, VJV and VHV are the most suitable choices for the Model 16 configuration.
	MODEL 2x Card-Cage-Only Chassis The Model 2x chassis provide all of the components required for a main (or expansion) Card-Cage-Only Chassis. Just add the VME cards and I/O cables. The Model 20 provides a rear-access card cage while the Model 28 is front-access. The VCV, VJV and VHV are the best chassis for the model 2x configurations, holding 5, 7 and 12-slots respectively. The VLV chassis can mount a top-access 21-slot card cage on special order.
	MODEL 3x Integrated System Chassis The Model 3x chassis are the foundation for fully "integrated" (card cage AND mass storage) systems. Mounting for up to four 5¼" full-height drives is available in the front of the chassis, while a card cage with up to 12 slots is accessible from the rear. Card cages with up to 5 slots may be front-access at the expense of some of the drive bays. All chassis except the VKV are appropriate for Model 3x configurations.

Customize these chassis with your choice of card cage, mass storage, power supply, cooling, card access, I/O openings, control panel, etc...

BACK NEXT